Rubber flat vulcanizing machine price: maintenance and maintenance pay attention to what

Release time

Jul 15,2021


Rubber flat vulcanizing machine is mainly used for conveyor belt, transmission belt, referred to as flat belt and other vulcanized flat belt (such as conveyor belt, transmission belt, referred to as flat belt), large pressure per unit area of hot plate, reliable operation of equipment, small maintenance. The main function of the rubber plate vulcanizer is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is provided by the heating medium (usually steam). According to the structure of the frame, the flat belt plate vulcanizing machine can be divided into column rubber plate vulcanizing machine and frame rubber plate vulcanizing machine. Depending on the number of working layers, there may be single and double layers. According to the working medium of the hydraulic system, hydraulic pressure and water pressure can be distinguished.

橡胶平板硫化机

Rubber flat vulcanizing machine price: maintenance and maintenance pay attention to what

The main maintenance of rubber plate vulcanizing machine should pay attention to the following problems:

1. The curing machine keeps the environment dry and ventilated to prevent moisture from making the wire wet.

2. Do not use vulcanizing machine in the field in rainy days to prevent the inflow of electric control box and heating plate.

3. When the working environment is humid and there is a lot of water, when disassembling and transporting the vulcanizer, use the items on the ground to support it high, and do not let the vulcanizer directly contact the water.

4. Improper operation during use, heating plate water, should first contact the manufacturer for repair. If you need emergency maintenance, you can open the heating plate cover, pour water first, and then set the electrical control box to manual operation, heat to 100, keep the constant temperature for 30 minutes, dry the circuit, and perform belt bonding in the manual state. At the same time, the production enterprise should be contacted in time to carry out the overall replacement of the route.

If the vulcanizer does not need to be used for a long time, the heating plate should be heated every half month (the temperature is set to 100) to keep the temperature at about 30 minutes.

6. After each use, the water in the water pressure plate must be put clean. Especially in winter, if the water can not be put clean, often water pressure plate rubber aging too early, water pressure plate life reduction. The correct drainage method is carried out after the end of the vulcanization insulation and before the decomposition of the vulcanizing machine. Add water after the machine is disassembled, and the water in the water pressure plate may not be completely discharged.

Rubber flat vulcanizer price: working principle When the rubber flat vulcanizer is working, the hot plate heats the rubber to produce rubber molecules, which change from a cross-linked, linear structure to a mesh-shaped structure. This is a product with certain physical and mechanical properties, but the adhesive After heating, it starts to be soft, and the moisture and volatile substances in the adhesive need to be gasified.

Rubber plate vulcanizing machine price: rubber plate vulcanizing machine is mainly used for vulcanization of flat belt. It has the advantages of high pressure unit in hot plate area, reliable operation and less maintenance. The main function of the volcano is to provide the pressure and temperature required for volcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is supplied by the heating medium. According to the number of working layers, it can be divided into single layer and double layer. According to the working medium of the hydraulic system, it can be divided into oil pressure and water pressure.

In the flat belt vulcanizer rubber industry, the flat belt vulcanizer is a front type vulcanizer. In the past, the flat belt volcanic rocks used in our country were mostly column structures, but at present, the frame structure is mainly used. Flat-striped volcanic rocks have some advantages over column-type flat-striped volcanic rocks.

Popular Articles


How to Choose a Steel Cord Conveyor Belt Vulcanizing Line for Mining: 6 Selection Checks

Choosing a steel cord conveyor belt vulcanizing line? Compare platen size, 3.0–4.5 MPa unit pressure, tension control, ±2 °C platen uniformity and MA compliance.

Nov 21,2026


Huahan Intelligent Attends SMC Cup 2026 China Rubber Machinery Annual Conference

Huahan Intelligent attended SMC Cup 2026 China Rubber Machinery Annual Conference in Beijing. They discussed digital, low-carbon vulcanization tech and overhead vulcanizing machines. We will leverage conference insights to upgrade vulcanization equipment and cooperate with industry partners for greener growth.

Oct 26,2026


Introduction to Huahan Intelligent Jaw‑type Vulcanizing Press

Global rubber manufacturers are increasingly searching for jaw‑type vulcanizing press and jaw hydraulic vulcanizing machine for processing extra‑long, wide and special‑shape rubber goods. Many visitors to Huahan Intelligent Equipment English website send inquiries asking: what exactly is a jaw‑type rubber vulcanizing press?

Oct 08,2026


Exhibition Information