Here is the placeholder text
What are the equipment characteristics of flat vulcanizing machine?
Release time
Dec 13,2021
What are the equipment characteristics of flat vulcanizing machine?
1. Heater: Built-in heater for electric mold, with high power, good heat conduction and long service life.
2. desuperheating rod: rotary structure, sensitive temperature measurement, fast desuperheating and high accuracy.
3. Electric heating plate: high-temperature high-quality alloy (electric high-temperature die steel), with high hardness, no deformation, thermal conductivity, corrosion resistance and other characteristics.
4. Pressure system: imported hydraulic cylinder and control pressure system are adopted, the pressure is stable and no noise.
Flat vulcanizing machine which is good? Flat vulcanizing machine operation procedure is how?
1. Before the test, please make sure that the fuel tank reaches the required scale, and then turn on the power to ensure that each part works normally and the column (frame) is lubricated.
2. Pay attention to the hot plate temperature when preheating. If it cannot meet the requirements, it is necessary to adjust under the guidance of the instructor. It is forbidden to move in secret. (David asher) preheat.
3. When the mold is placed between the hot plates, it is necessary to prevent burns or crushing accidents. The mold cannot be placed when the hot plate rises.
4. After the mold is filled, the person in the middle of the board stands in the middle of the workbench. When the required pressure is reached after closing, turn off the motor. If the requirements cannot be met, the teacher must be instructed to adjust and cannot move without permission.
5. Take the mold with an iron hook to prevent the pressure from hurting the hand. Open the mold, encounter oil viscous mold, knock the mold opening tool, clap your hands, prevent the mold from falling to the ground or breaking your feet.
6. When the machine fails, the power supply should be cut off immediately and reported to the teacher. It is strictly forbidden to dismantle the parts without permission. It is strictly forbidden to break the mold and handle it privately.
7. After the experiment, cut off the power supply, clean, after the inspection of the instructor, make the use record.
The structure of the plate vulcanizing machine has the following characteristics:
1. The fuselage is a fixed frame type, with small structure, good rigidity, and small deformation under the action of large combined force, which is beneficial to tire life and tire quality. The hydraulic vulcanizer is also a dual-mode cavity, but from a force point of view, the two single-mode vulcanizers are connected together. Under the action of the clamping force, the small deformation of the frame is symmetrical relative to the center line of the mold.
2, the action is fast and stable, greatly reducing the vulcanizing machine auxiliary time.
3. The machine has high accuracy, which greatly improves the accuracy of tire sizing. When the mold is opened, the upper mold part maintains high medium precision and repeatability only by vertical upward/downward movement. On the other hand, it is also advantageous in maintaining the precision of the active mold.
4. The upper and lower clamping force has a uniform force and is not affected by the working temperature.
5. The left and right frames of the machine can be equipped with a set of control systems, which can be controlled separately and work independently.
6. Each action of the device is simple and effective. There are basically no fragile parts during the user's use, and spare parts need to be replaced, and there is no need for regular maintenance and overhaul like a mechanical vulcanizer. Greatly reduce user operating costs and improve equipment utilization.
Popular Articles
Huahan Intelligent Attends SMC Cup 2026 China Rubber Machinery Annual Conference
Huahan Intelligent attended SMC Cup 2026 China Rubber Machinery Annual Conference in Beijing. They discussed digital, low-carbon vulcanization tech and overhead vulcanizing machines. We will leverage conference insights to upgrade vulcanization equipment and cooperate with industry partners for greener growth.
Oct 26,2026
Introduction to Huahan Intelligent Jaw‑type Vulcanizing Press
Global rubber manufacturers are increasingly searching for jaw‑type vulcanizing press and jaw hydraulic vulcanizing machine for processing extra‑long, wide and special‑shape rubber goods. Many visitors to Huahan Intelligent Equipment English website send inquiries asking: what exactly is a jaw‑type rubber vulcanizing press?
Oct 08,2026
Huahan Intelligent Completes Domestic Equipment Delivery During Mid‑Autumn Festival Holiday
On September 26, 2026, the second day of the Mid-Autumn Festival, Huahan Intelligent completed an urgent shipment of vulcanizing equipment. Five units (four rubber injection molding presses: RL-500T and SYR-600T) were loaded onto three separate trucks and dispatched to a domestic customer's factory. The arrangement ensures the equipment arrives on the first working day after the holiday. Assembly will be finished before National Day, followed by on-site installation, commissioning and trial run after the holiday to support the customer’s early production launch.
Sep 27,2026
Exhibition Information
Mobile website
Dalian Huahan Intelligent Equipment Company is world-class manufacturer and system solution provider for Steel-cord conveyor belt presses and molding equipments for rubber industry with globally development vision and environmental protection wisdom.
Contact Us
All Rights Reserved 2024 © Dalian Huahan Intelligent Equipment Co., Ltd.
WhatsApp：400-027-8858
Add：A101, Building C1, Bio City, No.666 Gaoxin Avenue, East Lake New Technology Development Zone, Wuhan
E-mail： sales@hh-hz.com
We will give you feedback in time
Get a quick response via text.